1948 Buick Roadmaster Sedanette w/ Dynaflow

Buick Roadmaster 1948 Description

This is a 1948 Buick Roadmaster Sedanette (Model 76S) with the optional Dynaflow automatic transmission. I bought this car in Arizona five years ago with the intent of restoring it as a very nice driver. It really shouldn't take much to polish this gem, ut unfortunately, simply don't have the time for it in my schedule so it needs to go to a caring home.

The car is complete. It starts, uns, rives and stops well. The last previous owner rebuilt the 320ci engine and fitted a later Dynaflow dipstick tube which moved the location from under the passenger floor to the engine compartment. The carburetor and water pump were rebuilt in 2013. The fuel/vacuum pump was rebuilt in 2013 with a kit from Then & Now so it can run today's fuel, nd I installed a 6V electric pump to help in hot starting conditions. The heat control valve was previously bypassed and I have removed it pending refurbishing. The temperature gauge is a temporary one, ut I have a NOS unit that has not been installed. I installed new wheel cylinders, ew brake shoes and a new master cylinder in 2012. The windshield wiper motor works but needs to be refurbished. The speedometer/odometer cable was snapped, hus those are inoperative.

The torque ball is leaking. I have a kit from Fatsco which I have not installed yet, s well as axle seals and other items related.

The car needs a new wiring harness throughout and remains 6V. Horns, eadlights, ail lights, rake lights and instrument lights function, ut other items (turn signals, lock, everse lights, ome light, lower fan) have been disconnected. The Sonomatic radio works. The starter is strong and has new brushes, he generator has new brushes, ew coil installed and a tune-up completed in 2014.

The last previous owner is responsible for the primer grey paint it currently wears, lthough the cowl tag indicates that this car was originally two-tone green. At some point, t was painted metallic grey and I assume that's when the current interior was installed. It is not correct but functional. Windshields front and rear are in fair condition, ome side windows are cracked but all crank up and down fine.

Body is straight and has minimal rust issues. Brightwork is all intact but some pieces need rework.

Comes with all the manuals I have acquired.

On Jul-12-15 at 07:20:41 PDT, eller added the following information:

A note about the rust: There are no obvious holes/rot nor sponginess in any of the rockers, oglegs or floor/trunk that I have found, nd the door bottoms are actually solid too. That's not to say there aren't pinholes, owever.
I'm unsure of what the previous owner did as far as body work but there are no patch panels installed anywhere. The seams are solid in the trunk and although I've not taken the seats out, had removed the carpet to inspect the floors and found nothing concerning, ven where the fill port access hole for the transmission is (passenger floor) or at the drivers location. The rear skirts are in great shape.

On Jul-13-15 at 17:36:15 PDT, eller added the following information:

Reserve lowered.